RM95.00 RM120.00
*STOCK CLEARANCE* 5L NIPPON PAINT 9000 GLOSS FINISH FOR WOOD AND METAL (READY MIX)
Price RM95.00 RM120.00
Product SKU 0109100XXXX05
Brand Nippon Paint
Size (L x W x H) 18 cm x 18 cm x 23 cm
Availability 133
Colour
Quantity
Description
Highlight
  • Good durability
  • Fungus resistance
  • Excellent gloss

NIPPON PAINT 9000 GLOSS FINISH FOR WOOD AND METAL

9000 Gloss Finish is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent gloss, fungus resistance and durability. Approved by SIRIM to Malaysian Standard MS 125 : 1995

 

PAINT TYPE PRODUCT TYPE FINISHING RECOMMENDED SUBSTRATE PACK SIZE
Solvent Based Interior & Exterior High Gloss Wood and Metal      5 Litres
COMPOSITION
PIGMENT Mainly Titamium Dioxide, Iron Oxide, Carbon Black and Organic Pigments
BINDER Soya Bean Oil Moditied Long Oil Alkyd
THINNER White Spirit
TECHNICAL DATA
DRYING TIME

  Touch Dry    : 2 hours

  Hard Dry      : 8 hours

  Drying time above is based on temperature 28 - 32°C, humidity 70 - 80% and 5% dilution with Nippon General Purpose Thinner.

RECOATING TIME

  8 hours

  Recoating time above is based on temperature 28 - 32°C, humidity 70 - 80% and 5% dilution with Nippon General Purpose Thinner. 

  *Important Note : 

Drying Time and recording time are strongly depending on environment ventilation, paint thickness, environment temperature, environement humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time prvoided is for guide only. 

DRY FILM THICKNESS   30 - 35 µm per coat (based on substrate condition)
NO. OF COATS

  2 COATS

THEORETICAL COVERAGE   9 - 11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance)
VOLUME SOLID   ~58%
SHELF LIFE   Up to 36 months in tight sealed container
APPLICATON METHOD
BURSH / ROLLER

  The paint is ready for use after thorough stirring. Dilute the paint with 5% - 10% of Nippon General Purpose Thinner, if necessary.

  Recommend to use Nippon Synthetic Brush or Nippon WB 4 Inch Roller for application

CONVENTIONAL AIR SPRAY   Dilute the paint with 15% of General Purpose Thinner.
AIRLESS SPRAY    The paint is ready for use after thorough stirring, 
RECOMMENDED COSTING SYSTEM
WOOD
SEALER / PRIMER

  9000 Aluminium Wood Primer  :  1 coat

UNDERCOAT   9000 Undercoat / Economy Undercoat  :  1 coat
TOP COAT   9000 Gloss Finish  :  2 coats
STEEL / IRON  
SEALER / PRIMER   Red Oxide Primer / Zinc Phosphate Primer  :  1 coat
UNDERCOAT    9000 Undercoat / Economy Undercoat  :  1 coat
TOP COAT   9000 Gloss Finish  :  2 coats
ALUMINIUM / GALVANIZED IRON
ETCHING PRIMER   Etching Primer 120 / Galvaprimer  :  1 Coat
SEALER / PRIMER   Red Oxide Primer / Zinc Phosphate Primer  :  1 Coat
UNDERCOAT   9000 Undercoat / Economy Undercoat  :  1 Coat
TOP COAT   9000 Gloss Finish  :  2 Coats
SURFACE PREPARATION

Wood

Surface must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper and then clean off and dry. The scraped areas should be spot-primed using an undercoat for wood surfaces.

 

Metal

Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove millscales and rust. Clean off dust and dry. The scraped areas should be spot-primed using a primer for metal.

CLEANING
Clean up equipment with water immediately after use. 
SAFETY PRECAUTIONS
  • Keep container tightly closed and keep out of reach children or away from food and drink.
  • Ensure good ventilation during application and drying.
  • When applying paint, it is advisable to wear eye protection.
  • In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
  • Remove splashes from skin by using soap or water.
  • Paint must always be stored in a cool place.
  • When transporting paint, care must be taken. Always keep container in a secure upright position.
  • Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.
NOTES

* Theoretical Coverage is based on a mathematical formula


and does not consider LOSS FACTORS.
Variables like porosity of substrate, application method, dilution ratio, dry film thickness, opacity and so on will affect the
loss factor and can vary from 30% - 50% or even more.
The above information is given to the best of our knowledge based on laboratory tests and practical experience.
However, since we cannot anticipate or control the many conditions under which our products may be used, we can only
guarantee the quality of the product itself.
We reserve the right to alter the given without prior notice.

 

COLOR CHART

Reviews (0)
view all
back
0
0 reviews
What's in the box

1 x 5L NIPPON PAINT 9000 GLOSS FINISH FOR WOOD AND METAL (READY MIX)

Also Bought Products