Price | RM145.00 RM129.00 |
Product SKU | NPBGF1P05 |
Brand | Nippon Paint |
Size (L x W x H) | 180 mm x 180 mm x 230 mm |
Availability | 975 |
Colour
|
|
Quantity |
|
- Good durability
- Fungus resistance
- Excellent gloss
NIPPON PAINT 9000 GLOSS FINISH FOR WOOD AND METAL PAINT
9000 Gloss Finish is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent gloss, fungus resistance and durability. Approved by SIRIM to Malaysian Standard MS 125 : 1995
PAINT TYPE | PRODUCT TYPE | FINISHING | RECOMMENDED SUBSTRATE | PACK SIZE |
Solvent Based | Interior & Exterior | High Gloss | Wood and Metal | 5 Litre |
COMPOSITION | ||||
PIGMENT | Mainly Titamium Dioxide, Iron Oxide, Carbon Black and Organic Pigments | |||
BINDER | Soya Bean Oil Moditied Long Oil Alkyd | |||
THINNER | White Spirit | |||
TECHNICAL DATA | ||||
DRYING TIME |
Touch Dry : 2 hours Hard Dry : 8 hours Drying time above is based on temperature 28 - 32°C, humidity 70 - 80% and 5% dilution with Nippon General Purpose Thinner. |
|||
RECOATING TIME |
8 hours Recoating time above is based on temperature 28 - 32°C, humidity 70 - 80% and 5% dilution with Nippon General Purpose Thinner. |
|||
*Important Note : Drying Time and recording time are strongly depending on environment ventilation, paint thickness, environment temperature, environement humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time prvoided is for guide only. |
||||
DRY FILM THICKNESS | 30 - 35 µm per coat (based on substrate condition) | |||
NO. OF COATS |
2 COATS |
|||
THEORETICAL COVERAGE | 9 - 11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) | |||
VOLUME SOLID | ~58% | |||
SHELF LIFE | Up to 36 months in tight sealed container | |||
APPLICATON METHOD | ||||
BURSH / ROLLER |
The paint is ready for use after thorough stirring. Dilute the paint with 5% - 10% of Nippon General Purpose Thinner, if necessary. Recommend to use Nippon Synthetic Brush or Nippon WB 4 Inch Roller for application |
|||
CONVENTIONAL AIR SPRAY | Dilute the paint with 15% of General Purpose Thinner. | |||
AIRLESS SPRAY | The paint is ready for use after thorough stirring, | |||
RECOMMENDED COSTING SYSTEM | ||||
WOOD | ||||
SEALER / PRIMER |
9000 Aluminium Wood Primer : 1 coat |
|||
UNDERCOAT | 9000 Undercoat / Economy Undercoat : 1 coat | |||
TOP COAT | 9000 Gloss Finish : 2 coats | |||
STEEL / IRON | ||||
SEALER / PRIMER | Red Oxide Primer / Zinc Phosphate Primer : 1 coat | |||
UNDERCOAT | 9000 Undercoat / Economy Undercoat : 1 coat | |||
TOP COAT | 9000 Gloss Finish : 2 coats | |||
ALUMINIUM / GALVANIZED IRON | ||||
ETCHING PRIMER | Etching Primer 120 / Galvaprimer : 1 Coat | |||
SEALER / PRIMER | Red Oxide Primer / Zinc Phosphate Primer : 1 Coat | |||
UNDERCOAT | 9000 Undercoat / Economy Undercoat : 1 Coat | |||
TOP COAT | 9000 Gloss Finish : 2 Coats | |||
SURFACE PREPARATION | ||||
Wood Surface must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper and then clean off and dry. The scraped areas should be spot-primed using an undercoat for wood surfaces.
Metal Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove millscales and rust. Clean off dust and dry. The scraped areas should be spot-primed using a primer for metal. |
||||
CLEANING | ||||
Clean up equipment with water immediately after use. | ||||
SAFETY PRECAUTIONS | ||||
|
||||
NOTES | ||||
* Theoretical Coverage is based on a mathematical formula
|
COLOR CHART
Nippon Paint 1L 9000 Gloss Finish For Wood And Metal - Off White Colour Range