Nippon Paint 5L 5400 Exterior/Interior Wall Sealer

RM67.00 RM129.00

Nippon Paint 5L 5400 Exterior/Interior Wall Sealer

Price	RM67.00 RM129.00
Product SKU	0100090540005
Brand	Nippon Paint
Size (L x W x H)	150 mm x 150 mm x 250 mm
Availability	4

Quantity

Product
Description
Reviews (0)
What's in the box

Description

Highlight
								Protect the finishing coats against the effects of mild alkalinity and moisture from the substrate.
For exterior & interior use

							

NIPPON PAINT 5400 Exterior/Interior Wall Sealer

5400 Wall Sealer is a Styrene acrylic water-based wall sealer. It is specially formulated for interior and exterior walls to protect the finishing coats against the effects of mild alkalinity and moisture from the substrate.

PAINT TYPE	PRODUCT TYPE	FINISHING	RECOMMENDED SUBSTRATE	PACK SIZE
Water Based	Interior & Exterior	Matt	Masonry, brick, plastering substrate and fibre board	5 / 18Litres
COMPOSITION
PIGMENT	Titanium Dioxide and Mineral Extender
BINDER	Styrene Acrylic Emulsion
THINNER	Water
TECHNICAL DATA
DRYING TIME	Touch Dry : 15 minutes (Dependent on temperature and humidity) Hard Dry : 1 hour (Dependent on temperature and humidity)
RECOATING TIME	2 hours minimum (Dependent on temperature and humidity)
DRY FILM THICKNESS	Around 30 µm per coat (based on substrate condition)
NO. OF COATS	1 Coat
THEORETICAL COVERAGE	10 – 12 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance)
VOLUME SOLID	~38%
SHELF LIFE	Up to 36 months in tight sealed container
APPLICATON METHOD
BURSH / ROLLER	Dilute the paint with not more than 5% of water. Preferable not dilute for best performance.
RECOMMENDED COSTING SYSTEM
Emulsion Paint
SEALER / PRIMER	5400 Wall Sealer : 1 coat
TOP COAT	Nippon Interior Products / Nippon Exterior Products : 2 coats
SURFACE PREPARATION
Remove all loose, defective paint or powdery residues, loose chalk, dust and foreign matter. Repair cracks, uneven surfaces with suitable fillers. Smoothen the filler areas with sand paper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) Spot prime with 5400 Wall Sealer.
CLEANING
Clean up equipment with water immediately after use.
SAFETY PRECAUTIONS
Keep container tightly closed and keep out of reach children or away from food and drink. Ensure good ventilation during application and drying. When applying paint, it is advisable to wear eye protection. In case of contact with eye, rinse with plenty of water immediately and seek medical advice. Remove splashes from skin by using soap or water. Paint must always be stored in a cool place. When transporting paint, care must be taken. Always keep container in a secure upright position. Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.
NOTES
* Theoretical Coverage is based on a mathematical formula and does not consider LOSS FACTORS. Variables like porosity of substrate, application method, dilution ratio, dry film thickness, opacity and so on will affect the loss factor and can vary from 30% - 50% or even more. The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control the many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given without prior notice.