88
15
Nippon Paint Slate Finish for Pebble Wash Sand Stone Garden/Kilat Utk Batu
RM34.00 - RM108.00 RM40.00 - RM114.00
Nippon Paint Slate Finish for Pebble Wash Sand Stone Garden/Kilat Utk Batu
Price RM34.00 - RM108.00 RM40.00 - RM114.00
Product SKU 0109010370X01
Brand Nippon Paint
Availability 64
Package
Quantity
Description
Highlight
  • Protective coating against stain, efflorescence and scratching

NIPPON PAINT Slate Finish for Pebble Wash Sand Stone Garden

Nippon Slate Finish for Pebble Wash Sand Stone Garden is a solvent based acrylic coating. It is specially formulated surface protective coating with added UV additive for treatment of interior and exterior slates, natural stone,cementitious substrate etc against staining, efflorescence and scratching. This coating willenhance the colour of material giving the surface a fine lustrous finish.

 

PAINT TYPE PRODUCT TYPE FINISHING RECOMMENDED SUBSTRATE PACK SIZE
Solvent based Interior/Exterior Matt/Gloss Slates, Brick, Concrete, Quarry, Porous tiles, Natural stones, Artificial stones, Terra cotta tiles, Cementitious substrates 1 / 5 / 20Litres
COMPOSITION
PIGMENT Not applicable
BINDER Acrylic
THINNER Aromatic hydrocarbon
TECHNICAL DATA
DRYING TIME

   Touch Dry      : 30 minutes (Dependent on temperature and humidity)

   Hard Dry      : 1 hour (Dependent on temperature and humidity)

RECOATING TIME

  4 hours minimum (Dependent on temperature and humidity)

*Important Note: Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment temperature, environment humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time provided is for guide only.
DRY FILM THICKNESS   Around 30 µm per coat (based on substrate condition)
NO. OF COATS

 2-3 Coats (For heavy traffic area, apply thicker for added protection)

THEORETICAL COVERAGE   7 – 10 m2 per litre per coat (Actual coverage is dependent on substrate condition, Irregular and porous substrate require more paint)
VOLUME SOLID   ~32%
SHELF LIFE   Up to 36 months in tight sealed container
APPLICATON METHOD
BURSH / ROLLER   The paint is ready for use after thorough stirring. Dilute the paint with 5% of OP-1 Thinner if necessary. Short-hair roller is preferable.
CONVENTIONAL AIR SPRAY   Dilute with maximum 5% of OP-1 Thinner
TOP COAT   Nippon Interior Products / Nippon Exterior Products  :  2 coats
SURFACE PREPARATION

New Surfaces

Surfaces to be painted must be cleaned thoroughly and dry. It must free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the substrate to be below 16% measured by protimeter and alkalinity of the substrate to be below pH9). Do not apply on damp or wet surfaces and during raining. This will cause haze white appearance and adhesion problem on the substrate.

Previously Painted Surfaces

Clean the surface with approved detergent & thinner and leave to dry. Then remove all previous loose coatings with mechanical tools or hand tools. Ensure that the surface is completely dry and free from loose flaking material, dust or contamination prior coating.

CLEANING
Clean up equipment with thinner immediately after use.
SAFETY PRECAUTIONS
  • Keep container tightly closed and keep out of reach children or away from food and drink.
  • Ensure good ventilation during application and drying.
  • When applying paint, it is advisable to wear eye protection.
  • In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
  • Remove splashes from skin by using soap or water.
  • Paint must always be stored in a cool place.
  • When transporting paint, care must be taken. Always keep container in a secure upright position.
  • Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.
NOTES

* Theoretical Coverage is based on a mathematical formula


and does not consider LOSS FACTORS.
Variables like porosity of substrate, application method, dilution ratio, dry film thickness, opacity and so on will affect the
loss factor and can vary from 30% - 50% or even more.
The above information is given to the best of our knowledge based on laboratory tests and practical experience.
However, since we cannot anticipate or control the many conditions under which our products may be used, we can only
guarantee the quality of the product itself.
We reserve the right to alter the given without prior notice.

 

Reviews (0)
view all
back
0
0 reviews
What's in the box

1 x Nippon Paint Slate Finish for Pebble Wash Sand Stone Garden