Price | RM143.00 RM150.00 |
Product SKU | 0109060000605 |
Brand | Nippon Paint |
Size (L x W x H) | 13 mm x 13 mm x 13 mm |
Availability | 5 |
Quantity |
|
- Good durability
- Protective Property
NIPPON PAINT 9000 Aluminium Paint
Nippon 9000 Aluminium Paint This is a ready-mixed aluminium paint which gives a lustrous finish with good durability and protective property.
R >
PAINT TYPE | PRODUCT TYPE | FINISHING | RECOMMENDED SUBSTRATE | PACK SIZE |
Solvent based | Interior/Exterior | Metallic Aluminium Lustre | Metal | 1 / 5 Litres |
COMPOSITION | ||||
PIGMENT | Aluminium | |||
BINDER | Modified alkyd / Modified phenolic resin | |||
THINNER | Hydrocarbon | |||
TECHNICAL DATA | ||||
DRYING TIME |
Touch Dry : Hard Dry : 30 minutes Hard Dry : 30 minutes : 8 hours Drying time above is based on temperature 28 – 32 °C, humidity 70 – 80% and 5% dilution with Nippon General Purpose Thinner. |
|||
RECOATING TIME |
8 hours minimum Drying time above is based on temperature 28 – 32 °C, humidity 70 – 80% and 5% dilution with Nippon General Purpose Thinner. |
|||
*Important Note: Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment temperature, environment humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time provided is for guide only. | ||||
DRY FILM THICKNESS | Around 25-30 µm per coat (based on substrate condition) | |||
NO. OF COATS |
1 -2 Coat |
|||
THEORETICAL COVERAGE | 9 - 11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) | |||
VOLUME SOLID | ~60% | |||
SHELF LIFE | Up to 12 months in tight sealed container | |||
APPLICATON METHOD | ||||
BURSH / ROLLER | The paint is ready for use after thorough stirring | |||
CONVENTIONAL AIR SPRAY | The paint is ready for use after thorough stirring. If necessary, dilute with 5% of General Purpose Thinner. | |||
RECOMMENDED COSTING SYSTEM | ||||
SEALER / PRIMER |
Acrylic 5170 Wall Sealer : 1 coat |
|||
TOP COAT |
9000 Aluminium Paint |
|||
SURFACE PREPARATION | ||||
Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove millscales and rust. Clean off dust and dry. The scraped areas should be spot-primed using a primer for metal. | ||||
CLEANING | ||||
Clean up equipment with water immediately after use. | ||||
SAFETY PRECAUTIONS | ||||
|
||||
NOTES | ||||
* Theoretical Coverage is based on a mathematical formula
|
1 x NIPPON PAINT 9000 ALUMINIUM PAINT