Price | RM34.00 - RM108.00 RM40.00 - RM114.00 |
Product SKU | 0109010370X01 |
Brand | Nippon Paint |
Availability | 55 |
Package
|
|
Quantity |
|
- Protective coating against stain, efflorescence and scratching
NIPPON PAINT Slate Finish for Pebble Wash Sand Stone Garden
Nippon Slate Finish for Pebble Wash Sand Stone Garden is a solvent based acrylic coating. It is specially formulated surface protective coating with added UV additive for treatment of interior and exterior slates, natural stone,cementitious substrate etc against staining, efflorescence and scratching. This coating willenhance the colour of material giving the surface a fine lustrous finish.
PAINT TYPE | PRODUCT TYPE | FINISHING | RECOMMENDED SUBSTRATE | PACK SIZE |
Solvent based | Interior/Exterior | Matt/Gloss | Slates, Brick, Concrete, Quarry, Porous tiles, Natural stones, Artificial stones, Terra cotta tiles, Cementitious substrates | 1 / 5 / 20Litres |
COMPOSITION | ||||
PIGMENT | Not applicable | |||
BINDER | Acrylic | |||
THINNER | Aromatic hydrocarbon | |||
TECHNICAL DATA | ||||
DRYING TIME |
Touch Dry : 30 minutes (Dependent on temperature and humidity) Hard Dry : 1 hour (Dependent on temperature and humidity) |
|||
RECOATING TIME |
4 hours minimum (Dependent on temperature and humidity) |
|||
*Important Note: Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment temperature, environment humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time provided is for guide only. | ||||
DRY FILM THICKNESS | Around 30 µm per coat (based on substrate condition) | |||
NO. OF COATS |
2-3 Coats (For heavy traffic area, apply thicker for added protection) |
|||
THEORETICAL COVERAGE | 7 – 10 m2 per litre per coat (Actual coverage is dependent on substrate condition, Irregular and porous substrate require more paint) | |||
VOLUME SOLID | ~32% | |||
SHELF LIFE | Up to 36 months in tight sealed container | |||
APPLICATON METHOD | ||||
BURSH / ROLLER | The paint is ready for use after thorough stirring. Dilute the paint with 5% of OP-1 Thinner if necessary. Short-hair roller is preferable. | |||
CONVENTIONAL AIR SPRAY | Dilute with maximum 5% of OP-1 Thinner | |||
TOP COAT | Nippon Interior Products / Nippon Exterior Products : 2 coats | |||
SURFACE PREPARATION | ||||
New Surfaces Surfaces to be painted must be cleaned thoroughly and dry. It must free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the substrate to be below 16% measured by protimeter and alkalinity of the substrate to be below pH9). Do not apply on damp or wet surfaces and during raining. This will cause haze white appearance and adhesion problem on the substrate. Previously Painted Surfaces Clean the surface with approved detergent & thinner and leave to dry. Then remove all previous loose coatings with mechanical tools or hand tools. Ensure that the surface is completely dry and free from loose flaking material, dust or contamination prior coating. |
||||
CLEANING | ||||
Clean up equipment with thinner immediately after use. | ||||
SAFETY PRECAUTIONS | ||||
|
||||
NOTES | ||||
* Theoretical Coverage is based on a mathematical formula
|
1 x Nippon Paint Slate Finish for Pebble Wash Sand Stone Garden