Price | RM138.00 - RM162.00 RM189.00 - RM213.00 |
Product SKU | H.Wood 5L |
Brand | Nippon Paint |
Size (L x W x H) | 280 mm x 160 mm x 300 mm |
Availability | 3802 |
Colour
|
|
Quantity |
|
• Anti-bacterial (Effective against E.coli, MRSA, Staphyloccocus Aureus)
• Environmental-friendly green paint for wood
• Low VOC
• Excellent satin finishing
• Scratch resistance
• Fungus resistance
NIPPON PAINT Hydro Wood
Hydro Wood is water-based pure acrylic product. It is an environmentally favourable green product formulated with low VOC (Volatile Organic Compound) for interior wood surface. It is formulated with a solvent-free resin to limit air pollutants and has an extremely low odour during application and drying. As it is fast drying as compared to solvent based, it can be recoated within the same day. It provides colour to wood surfaces and highlighting the natural wood grains. It is easy to apply and forms a tough paint film with excellent gloss, scratch resistance for foot traffic, durability and fungus resistance.
Hydro Wood special formulated with Dry film Anti-bacterial property which protects the environment from bacteria such as MRSA, E-Coli and Staphylococcus Aureus.
PAINT TYPE | PRODUCT TYPE | FINISHING | RECOMMENDED SUBSTRATE | PACK SIZE |
Water based | Interior | Satin | Wood surfaces including parquet flooring, furniture and wood panels | 1 / 5Litres |
COMPOSITION | ||||
PIGMENT | Iron Oxide, Carbon Black and Organic Pigments | |||
BINDER | Multifunctional Acrylic Polymer | |||
THINNER | Water | |||
TECHNICAL DATA | ||||
DRYING TIME |
Touch Dry : 30 minutes Hard Dry : 4 hours Drying time above is based on temperature 28 – 32 °C, humidity 70 – 80% |
|||
RECOATING TIME |
2-3 hours (minimum) Recoating time above is based on temperature 28 – 32 °C, humidity 70 – 80% and 5% |
|||
*Important Note: Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment temperature, environment humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time provided is for guide only. |
||||
DRY FILM THICKNESS |
20 - 30 µm per coat (based on substrate condition) |
|||
NO. OF COATS |
2 - 3 coats |
|||
THEORETICAL COVERAGE | 7-11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) | |||
VOLUME SOLID | ~32% | |||
SHELF LIFE | Up to 36 months in tight sealed container | |||
APPLICATON METHOD | ||||
BURSH / ROLLER | The paint is ready for use after thorough stirring. Dilute the paint with 5% of Water, if necessary. Recommend to use Nippon Synthetic Brush or Nippon WB 4 Inch Roller for application. | |||
CONVENTIONAL AIR SPRAY | Dilute the paint with 5% - 10% of water if necessary | |||
RECOMMENDED COSTING SYSTEM | ||||
TOP COAT | Hydro Wood (Remark: Finish colour could vary depending on type and colour of the wood being applied. Thicker paint film will also give a darker colour) - 2 to 3 Coats | |||
SURFACE PREPARATION | ||||
Smoothen the surface to be painted using floor sander or sand paper of Grade #80 or #100. If necessary, fill wood grain with appropriate filler and then smoothen with sandpaper. Ensure that the surface is clean, dry and free from wax before applying the first coat. Allow the paint to dry. Dry and sand lightly between the 1st and 2nd coat. Remove all unstable paint film, dust, oil, wax and other foreign matters. Particular care is necessary on previously waxed surfaces and thorough mechanical sanding is recommended to remove all wax. Presence of wax on substrates will affect the drying and adhesion of Hydro Wood. If the previous paint film is in sound condition and without wax, smoothen it with sand paper. Clean off and dry. |
||||
CLEANING | ||||
Clean up equipment with water immediately after use. | ||||
SAFETY PRECAUTIONS | ||||
|
||||
NOTES | ||||
* Theoretical Coverage is based on a mathematical formula
|
1 x Nippon Paint 5L Hydro Wood Paint