|Size (L x W x H)||120 mm x 120 mm x 120 mm|
- Excellent Gloss Retention
- Good Hiding & Easy-To-Apply
- Fungus Resistance
- Water Resistance
- Malaysia Made
MCI 1L Blue-i Gloss 6600 Wood & Metal Paint
BLUE-i Gloss 6600 is a high quality fast drying solvent-based alkyd high gloss enamel for exterior & interior application on metal & wood surfaces. It is antifungal and water resistant, good hiding & easy-to-apply, having excellent gloss retention, making it ideal to be used in repainting works or housing projects where budget & fast completion of works are of major concern.
FEATURES & BENEFITS
- Excellent Gloss Retention for longer-lasting gloss that keeps your home looking fresh & vibrant.
- Good Hiding & Easy-To-Apply that provides effortless application with smooth finish.
- Fast Drying that saves time & manpower where budget & fast completion of works are of major concern.
- Fungus Resistance as to prevent unsightly growth of surface fungus on painted substrates.
- Water Resistance as to prevent moisture absorption for prolonged substrate usage life.
New Ferrous Metal / Wood
Surface generally must be clean, free from rust, oil, grease, dust and other contaminants and must be thoroughly dried before application. Steel surface shall be manually wire brush or power tool cleaning to remove all rust or loose millscale as to comply with minimum Swedish Standard ST 3, then primed with appropriate anti-corrosion primer follow by undercoat before application of finishing coat. Wood surface shall be sand down to smoothen the surface, then primed with aluminium wood primer follow by undercoat before application of finishing coats.
Previously Painted Ferrous Metal / Wood
Previously painted surface should be thoroughly rubbed down using a suitable abrasive paper and then dusted off. Any loose and flaking paint film must be scraped off, rust should be thoroughly removed. The entire surface must be dry and free from dust, grease and other contaminants, spot-primed any surface imperfection with appropriate primer / undercoat before application of finishing coats.
1 Litre / 5 Litres
|Color||Refer BLUE-i Gloss 6600 Color Card|
|Thinner||White Spirit or Turpentine|
|Dry Film Tickness||30 microns / coat|
|Theoretical Coverage||9 - 10 m² / litre / coat (actual coverage is dependent on substrate condition)|
|no. of Coats||Minimum 2 coats|
|touch Dry||1 hour (depends on temperature and humidity)|
|Recoating Interval||4 hours|
|Shelf Life||Minimum 12 months if properly stored|
|Brush/ Roller||Dilute up to 5% of White Spirit / Turpentine if necessary|
|Conventional Air Spray||Dilute up to 20% of White Spirit / Turpentine if necessary|
|Ailess Spray||Dilute up to 5% of White Spirit / Turpentine if necessary|
|Handling||Stir the paint thoroughly until completely mixed before painting|
|Clean up||Clean up equipment with White Spirit / Turpentine immediately after painting|
1 x MCI 1L Blue-i Gloss 6600 Wood & Metal Paint | Cat Minyak Kilat Enamel