Price | RM22.00 - RM25.00 RM25.00 - RM28.00 |
Product SKU | NPPHGXXXX01 |
Brand | Nippon Paint |
Size (L x W x H) | 120 mm x 120 mm x 120 mm |
Availability | 66968 |
Colour
|
|
Quantity |
|
- Fast Drying
- Wide range of colours for vibrant finishes
- Excellent high gloss
- Durable and tough paint film
- Fungus Resistant
- Non-added lead or mercury
NIPPON PAINT 9000 PLATONE HIGH GLOSS FOR WOOD AND METAL PAINT
Platone High Gloss is an oil-modified alkyd enamel paint. It is easy to apply and forms a smooth, tough paint film which has excellent high gloss, fungus resistance and durability.
PAINT TYPE | PRODUCT TYPE | FINISHING | RECOMMENDED SUBSTRATE | PACK SIZE |
Solvent Based | Interior & Exterior | High Gloss | Wood and Metal | 1 Litre |
COMPOSITION | ||||
PIGMENT | Mainly Titamium Dioxide, Iron Oxide, Carbon Black and Organic Pigments | |||
BINDER | Soya Bean Oil Modified Alkyd | |||
THINNER | White Spirit | |||
TECHNICAL DATA | ||||
DRYING TIME |
Touch Dry : 1 hours Hard Dry : 3 hours Drying time above is based on temperature 28 - 32°C, humidity 70 - 80% and 5% dilution with Nippon General Purpose Thinner. |
|||
RECOATING TIME |
3 hours Recoating time above is based on temperature 28 - 32°C, humidity 70 - 80% and 5% dilution with Nippon General Purpose Thinner. |
|||
*Important Note : Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment temperature, environment humidity, number of coats applied, thinner used to dilute product and recoat materials. So drying time and recoating time provided is for guide only. |
||||
DRY FILM THICKNESS | 30 - 35 µm per coat (based on substrate condition) | |||
NO. OF COATS |
2 COATS |
|||
THEORETICAL COVERAGE | 9 - 11 m2 per litre per coat (Actual coverage is dependent on substrate condition, application method, application condition and finishing appearance) | |||
VOLUME SOLID | ~55% | |||
SHELF LIFE | Up to 36 months in tight sealed container | |||
APPLICATON METHOD | ||||
BURSH / ROLLER |
The paint is ready for use after thorough stirring. Dilute the paint with 5% - 10% of Nippon General Purpose Thinner, if necessary. Recommend to use Nippon Synthetic Brush or Nippon WB 4 Inch Roller for application |
|||
CONVENTIONAL AIR SPRAY | Dilute the paint with 15% of General Purpose Thinner. | |||
AIRLESS SPRAY | The paint is ready for use after thorough stirring, | |||
RECOMMENDED COSTING SYSTEM | ||||
WOOD | ||||
UNDERCOAT | 9000 Undercoat / Economy Undercoat : 1 coat | |||
TOP COAT | Platone High Gloss Finish : 2 coats | |||
METAL | ||||
SEALER / PRIMER | Red Oxide Primer : 1 coat | |||
UNDERCOAT | Economy Undercoat : 1 coat | |||
TOP COAT | Platone High Gloss Finish : 2 coats | |||
SURFACE PREPARATION | ||||
Wood Surface must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper and then clean off and dry. The scraped areas should be spot-primed using an undercoat for wood surfaces.
Metal Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove millscales and rust. Clean off dust and dry. The scraped areas should be spot-primed using a primer for metal. |
||||
CLEANING | ||||
Clean up equipment with water immediately after use. | ||||
SAFETY PRECAUTIONS | ||||
|
||||
NOTES | ||||
* Theoretical Coverage is based on a mathematical formula
|
1 x Nippon Paint 1L Platone High Gloss For Wood And Metal