Nippon Paint 18L Easy Wash White Paint 145

RM300.00 RM559.00

Nippon Paint 18L Easy Wash White Paint 145

Price	RM300.00 RM559.00
Product SKU	NPEW014518
Brand	Nippon Paint
Size (L x W x H)	300 mm x 300 mm x 350 mm
Availability	6

Quantity

Product
Description
Reviews (0)
What's in the box

Description

Highlight
								Good levelling
Good coverage
Good washability
Excellent hiding
Low odour & low VOC
MS Standard - MS 903:1984
MS License - PC004443
							

NIPPON PAINT EASY WASH PAINT

EasyWash is a modified acrylic emulsion paint with non-added lead and mercury which gives a very smooth classical matt finishing for internal walls. It is specially formulated with Low VOC and Alkyd Phenol Ethoxylate free for interior walls. This affordable medium premium range paint has good stain washability, good hiding power, easy application and durable functions.

PAINT TYPE	PRODUCT TYPE	FINISHING	RECOMMENDED SUBSTRATE	PACK SIZE
Water Based	Interior	Matt	Masonry, brick, plastering substrate fibre board	5 / 18 Litres
COMPOSITION
PIGMENT	Mainly Titamium Dioxide, Iron Oxide, Carbon Black, Organic Pigments and Mineral Extender
BINDER	Acrylic Copolymer
THINNER	Water
TECHNICAL DATA
DRYING TIME	Touch Dry : 30 minutes (dependent on temperature and humidity) Hard Dry : 1 hour (Dependent on temperature and humidity)
RECOATING TIME	2 hours (Dependent on temperature and humidity)
DRY FILM THICKNESS	Around 30 μm per coat (based on substrate condition)
NO. OF COATS	2 coats
THEORETICAL COVERAGE	9 - 11m² per litre per coat (Actual coverage is dependent n substrate condition, application method, application condition and finishing appearance.
VOLUME SOLID	~42%
SHELF LIFE	Up to 36 months in tight sealed container
APPLICATON METHOD
BURSH / ROLLER	Dilute the paint with not more than 5% of water. Prferable not dilute for best performance.
RECOMMENDED COSTING SYSTEM
SEALER / PRIMER	5200 Wall Sealer / 5300 Basecoat Sealer / 5400 Wall Sealer / Aryclic 5170 Wall Sealer / Hi-Bond Wall Sealer (on powdery or skim-coated surface) : 1 Coat
TOP COAT	Easy Wash : 2 Coats
SURFACE PREPARATION
Remove all loose, defective paint or powdery residues, loose chalk, dust and foreign matter. Repair cracks, uneven surfaces with Multi-purpose Joint Compound or suitable fillers. Smoothen the putty / filler areas with sand paper. Surfaces to be painted must be cleaned thoroughly and dry, it must be free from dirt, grease and other foreign matters. Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.) Spot prime with Nippon Interior Wall Sealer.
CLEANING
Clean up equipment with water immediately after use.
SAFETY PRECAUTIONS
Keep container tightly closed and keep out of reach children or away from food and drink. Ensure good ventilation during application and drying. When applying paint, it is advisable to wear eye protection. In case of contact with eye, rinse with plenty of water immediately and seek medical advice. Remove splashes from skin by using soap or water. Paint must always be stored in a cool place. When transporting paint, care must be taken. Always keep container in a secure upright position. Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.
NOTES
* Theoretical Coverage is based on a mathematical formula and does not consider LOSS FACTORS. Variables like porosity of substrate, application method, dilution ratio, dry film thickness, opacity and so on will affect the loss factor and can vary from 30% - 50% or even more. The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control the many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given without prior notice.