| Price | RM220.00 RM390.00 |
| Product SKU | 31RXTT |
| Brand | Nippon Paint |
| Size (L x W x H) | 270 mm x 270 mm x 250 mm |
| Availability | 62 |
|
Colour
|
|
| Quantity |
|
- Single component-no mixing required
- Easily applied-can be applied by non-skilled labour
- Flexible-capable of bridging stationary cracks
- Barrier against salts and atmospheric gases
- High build-masking imperfections in substrates
- Waterproof-versatile and multi-purpose
- U.V stable-long service life and maintains its appearance
NIPPON PAINT WEATHERBOND EXTERIOR PAINT
Nippon FLEX 200 is a single component, elastomeric, breathable, acrylic copolymer liquid apply waterproofing coating. It is air cured to form a seamless, UV-durable, protective waterproofing coating. It resists ageing from heat, UV, sunlight, rain, wind or frost and ozone. It resists water but allows water vapour to escape through it, and thus preventing blistering issue.
Uses: Nippon FLEX 200 is a basic waterproofing coating for old and new construction. It is suitable for above ground, interior and exterior waterproofing applications such as:
- RC roof, car porch roof, open roof terrace
- Balconies, A/C ledge, Overhangs, and etc
- Walls and RC fencing
- Asbestos
- Timber
- Asphalt/Bitumen
Advantages:
- Single component--no mixing required
- Easily applied--can be applied by non-skilled labour
- Flexible--capable of bridging stationary cracks
- Barrier against salts and atmospheric gases
- High build--masking imperfections in substrates
- Waterproof-versatile and multi-purpose
- U.V stable--long service life and maintains its
| Product Type | Product Grade | Packsize | Finishing | Color | Substrate | ||||||||||||||||||||||||
| Liquid Apply Waterproofing | Nippon FLEX 200 | 20kg/pail ; 5kg/pail | low sheen | White, Grey, Green etc | Concrete | ||||||||||||||||||||||||
| Application Data | |||||||||||||||||||||||||||||
| Application temperature | : 0°C to 45°C | ||||||||||||||||||||||||||||
| Service temperature | : -5°C to 80°C | ||||||||||||||||||||||||||||
| Theoretical coverage | : 0.25-0.35kg/m2 /coat (note: the actual coverage depends on the type of substrate, substrate surface porosity, substrate texture, and whether a primer is used) | ||||||||||||||||||||||||||||
| Special Notes | : Limits to heavy traffic and heavy traffic | ||||||||||||||||||||||||||||
| Typical Technical Data | |||||||||||||||||||||||||||||
|
*All values given are subject to 5-10% tolerance |
|||||||||||||||||||||||||||||
| Application Method | |||||||||||||||||||||||||||||
|
Substrate Preparation Concrete and Masonry Substrate The substrate must be thoroughly clean and dry, free from dust, algae, mildew, fungal, grease and oil. All the contaminants, previous waterproofing and impurity must be removed till bare substrate. Any cracks, honey combs, water leakage area should be repaired by Nippon Repair System (for more detail, please refer to Nippon Technical Department) before the waterproofing work proceed. The substrate must be sound. The concrete surface should be flat and free from holes and undulations. Any holes and undulations should be resurfacing with Nippon Scratch Coat System. The surface should be clean smooth and have a slope of at least 1-2% to allow water run-off. Mixing Stir the product thoroughly using mechanical mixer at a slow speed drill at 300-400 rpm fitted with suitable paddle for 1- 2minutes. Do not add any additional water or solvent to the product. Application Apply the first coat at a rate of 0.25-0.35kg/m2 /coat to completely cover the holes, cracks and etc with a soft bristled brush or roller. Once the first coat is torch dry, apply the second and subsequent coats at a rate of 0.25-0.35kg/m2 /coat in order to achieve the required total dry film thickness at 1mm. The second coat shall be applied at right angles to the first coat. For a reinforcement waterproofing system, apply a layer of Nippon LM Mat, an alkali resistant mat, onto the first coat of Nippon FLEX 200 at 0.5kg/m2 while still wet, firmly embed the mat into the Nippon FLEX 200, and ensure no air is trapped beneath. Immediately apply second and forth saturated coat of Nippon FLEX 200 at a rate of 0.35kg/m2 /coat to achieve a total final dry film thickness at 1.5-2.0mm. Each subsequent coat shall be applied at right angles to the previous coat. Detailing Treatment All detailing should be applied before proceeding with the large field area. Right angle and corner should have 25mm Nippon Latex modified cement sand angle fillet. Extra treat the expansion joint with de-bonding tape before apply reinforcement. Extra treat all upstands, penetrations, joints with reinforcement waterproofing system. Use wet on wet application, and ensure the Nippon LM Mat overlaps at 75mm. |
|||||||||||||||||||||||||||||
| Recommended Waterproofing System | |||||||||||||||||||||||||||||
|
Concrete Substrate Waterproofing (standard) |
: Nippon FLEX 200 at 0.25-0.35kg/m2 /coat : Nippon FLEX 200 at 0.25-0.35kg/m2 /coat : Nippon FLEX 200 at 0.25-0.35kg/m2 /coat |
||||||||||||||||||||||||||||
| Waterproofing (reinforcement) |
: Nippon FLEX 200 at 0.5kg/m2 /coat : Nippon LM MAT at 75g/m2 /layer : Nippon FLEX 200 at 0.35kg/m2 /coat : Nippon FLEX 200 at 0.35kg/m2 /coat : Nippon FLEX 200 at 0.25-0.35kg/m2 /coat |
||||||||||||||||||||||||||||
| Environmental Conditions During Application | |||||||||||||||||||||||||||||
|
1. Apply temperature: 0-45°C. Do not apply when the surface to be coated is less than 3C above the dew point. 2. The humidity for application is 30-80% |
|||||||||||||||||||||||||||||
| Storage and Transportation | |||||||||||||||||||||||||||||
| This product should be stored in original container in a shaded or cool and adequate ventilation warehouse. The storage temperature should be 15-35°C. This product should be away exposure from rain, UV, sunlight, source of flame and heat. When transporting, care must be taken. Failure to comply with the recommended storage may result in considerable premature deterioration of the product and shorten its shelf life. While reopen for reuse, if skin has formed, remove the skin and stir well before reuse. | |||||||||||||||||||||||||||||
| Cleaning | |||||||||||||||||||||||||||||
| Clean up equipment or tools with Water immediately after use. Cured material can be removed mechanically. | |||||||||||||||||||||||||||||
| Safety Precautions | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| Notes | |||||||||||||||||||||||||||||
| The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control the many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given without prior notice | |||||||||||||||||||||||||||||
1 x Nippon Paint Flex 200 Acrylic Waterproofing 20L
